Order and logistics

 

 Updated: 8 Feb 2016

 

 

Sitemap              Subscribe to News

 

Startpage > Products > Gas Detection > Ozone

printer-friendly page

 

GAS DETECTION - TOXIC, OZONE - DELUXE

   

FS 940 Fixed Ozone Monitor is a pumped monitor compatible with 2 types of ozone sensors, OZL and OEL, as well as a temperature and humidity sensor, if required.

Its pumped design means the FS 940 is capable of measuring ozone in remote locations such as a duct or separate room.

A filter can also be installed on the inlet which will extend the life of the sensor when used in dusty environments.

The sensor is housed in a robust IP65/NEMA 4 rated water resistant enclosure protecting it from water damage.

There is also the option to include an integrated display for reporting real-time ozone concentrations.

The FS 940 outputs are designed to measure and control ozone concentrations and communicate to a variety of hardware systems. The monitor can operate in three ways:

  • As a relay controller via the integrated relays and user configurable set points to control an external device such as an ozone generator or initiate an alarm.
     

  • As an ozone transmitter via the 4-20 mA output which allows connection to a PLC or current sensing device to provide ozone concentration information for applications such as health and safety monitoring.
     

  • As an ozone network via the RS485 digital output to enable ozone monitoring at several indoor locations with information being logged to a central point.

The FS 940 monitor is easy to install due to the lightweight enclosure and provided wall mounting kit. It requires a 24V power supply which is user supplied to allow flexibility in locations it can be installed. The sensor heads are simple to replace and can be sent back to AP for recalibration.

Features

  • Active sampling via Teflon tubing and pump

  • Excellent water ingress protection

  •  Remote sampling from inaccessible areas

  • Multiple analog and digital outputs

  • Large LED display option

  • Real-time network capability

  • PC data logging and networking

  • Temperature and RH sensor optional

Applications

  • Pressure & flow fluctuating environments

  • Controlled atmospheres (e.g. produce storage)

  • Low oxygen environments (3-5% O2)

  • Indoor air quality (e.g. duct sampling)

  • Sampling outdoor air quality

  • Filtered Air Sampling

FS 940

 

Measuring

   

 

 

Ozon in Air

Configuration

Manual

 

 

 

 

 

 

 

 

 

 

 

 

FS 930 with flashlight

 

     

FS 930

 

   

 

   

Manual

 

 

 

 

 SM70

 

     

SM 70

 

   

 

   

Manual

 

E-mail: ewert@automatikprodukter.se     

Phone: +46(0)31-287202

Mobile: +46(0)708885298

Disclaimer

Webmaster

blog counter