Order and logistics

 

  Updated: 10 May 2020

 

View Ewert Johansson's LinkedIn profile

Sitemap              Subscribe to News

 

Startpage > Products > CO2 > Explosive gas

printer-friendly page

 

EXPLOSIVE GAS

 

 

ATEX Gas detectors are available for 2 explosion classes as follows:

Zone 1 is available with or without display.

Gas detectors for ATEX Zone 1 are located in a flameproof enclosure, EEx d

The shell is such that ignition and combustion within the shell of a potential explosive gas mixture is not propagated to the explosive mixture outside the enclosure and the enclosure can thus endure the resulting explosion pressure without damage.

In Zone 1, one can expect an explosive atmosphere to occur during normal operation but the presence of it is relatively short.

The equipment shall not be a source of ignition in normal operation or when an error occurs.

Gas detectors for ATEX Zone 2 are of the design Non-sparking EEx nA

EEx nA is a non-sparking piece equipment.

In Zone 2, you need not count with an explosive atmosphere to occur during normal operation, and if it should occur, which is probably rare it is of short duration.

The equipment shall not be a source of ignition during normal operation.

 

 
   

ATEX

Modbus
ATEX

 

 

 

Datasheet

Address list


EEx-d ATEX Protection Class

 


EEx-n ATEX Protection Class

 
 

 

E-mail: lars@fjellcom.se     

Phone: +46(0)31-287202

Mobile: +46(0)706-755561

Disclaimer

Webmaster

blog counter